Détails des affaires
À la maison / Les Affaires /

Cas d'entreprises concernant Why Use a Tuning Fork Level Switch?-100 Questions About Tuning Fork Level Switches

Why Use a Tuning Fork Level Switch?-100 Questions About Tuning Fork Level Switches

2026-09-19

09. Why Use a Tuning Fork Level Switch?

Tuning fork level switch (vibrating fork level switch) is one of the most popular point level sensors for liquids, powders and granules. It is widely selected for these key advantages:
(1)Simple & reliable operation
It works based on vibration frequency change. No moving parts, so little mechanical wear and low failure rate. Not easily affected by turbulence, foam, bubbles or material dielectric changes.
(2)Wide media compatibility
Properly selected models can detect liquids, powders and granular solids. Suitable for water, oil, chemicals, grain, plastic pellets, cement powder, flour and more.
(3)Easy installation & maintenance-free
Compact structure, can be mounted on tank side or top. No calibration required after installation, almost no routine maintenance needed.
(4)Wide working condition range
Available versions support high temperature, high pressure and corrosive media for industrial environments.
(5)Fast switch output
Provides instant on/off signal for high level alarm, low level alarm, pump interlock, overfill protection and empty tank warning.
(6)Cost-effective
Compared with many other level measurement instruments, it has a lower purchase cost for point level detection tasks.
(7)Limitations to note
Not fit for extremely sticky media that sticks firmly on fork prongs and stops vibration. It only does point detection and cannot output continuous level value.

dernière affaire concernant Why Use a Tuning Fork Level Switch?-100 Questions About Tuning Fork Level Switches  0